Call: 800-974-9422
DI-150S Pneumatic Impacting Vibrator is of heavy-duty construction having a cast aluminum body and a hardened steel piston. A Damper Kit is supplied as standard to be used between the vibrator and the mounting plate to significantly reduce noise.

The DI-150S units can be used on our portable DCM mounts where welding to the container is not feasible.
Unit of Measure


N/A 275 mm10.83 in


N/A 130 mm5.12 in


N/A 90 mm3.54 in


N/A 10 mm0.39 in


N/A 100 mm3.94 in


N/A 50 mm1.97 in


N/A 13 mm0.51 in

H (No.)

N/A 1/2 (4)

Maximum Impact Rate with Controller

N/A 100

Minimum Impact Rate with Controller

N/A 6

Air Consumption/Impact at 6 Bar 87 PSI

N/A 0.03 CFM0.8 L/min

Power Source

N/A Air

Features & Benefits

N/A Simulates Hammer Blows, High Amplitude, Precise Control - Aluminum Body


N/A Spray Dryer, Weigh Hoppers, Cyclones, & Non Storing Containers - for Wall Thickness 2mm - 4mm

Recommended Bin Wall Thickness

N/A 3 to 6 mm1/8 to 1/4 in

Frequency (Max)

N/A Very Low 6 - 100 Impacts/Min

Inlet Port Size for Air Vibrator

N/A 1/8 in


N/A Piston

Force Applied

N/A Linear Impacting (Hammer)


N/A High


N/A Moderate


N/A Occasional Cleaning

Force Output Adjustment

N/A Controlled Through Air Pressure Regulation

Vibrator Weight

N/A 3.3 kg7 lb

Max. Material in Tapered Portion of Bin

N/A For Wall Thickness 2mm - 4mm


N/A Adjustable Impacts to fit Application Highly Efficient Low air consumption Low Maintenance Powerful Impact Force Pressure Range 60 to 87 psi Quiet Operation Rugged, Dependable & Economical

Frequency (Max)

N/A Very Low 6 - 100 Impacts/Min

Key Features

N/A Adjustable force Four Sizes Available Low Air Consumption Low Impact Frequency (6-100 impacts p/min.) Timers and Controllers are available